Chilled Hard Cast Iron Roll III (CCIII) is made from a high-chromium-molybdenum alloy that is extremely hard and wear-resistant to withstand heavy loads and high-wear environments. Its hardness can reach 65-80 HSD, and it has good thermal conductivity and heat dissipation. It can dissipate heat evenly, prevent local overheating of the roll body, reduce thermal deformation and thermal stress, and improve rolling accuracy. It has good cooling and hardening properties, can quickly dissipate heat during the rolling process, maintain the hardness and shape stability of the roll, and ensure the dimensional accuracy of the rolled products. It is suitable for narrow-strip rolling mills and can meet the rolling needs of narrow-strip metal billets, including narrow-strip steel and aluminum of different sizes and materials. It can ensure that the rolled metal products have high-quality surface finish and dimensional accuracy.
Hardness HSD: 65-80
Nickel composition %: 2.01-3.0
Suitable for racks: refined and rolled
Usage: Small section mills, wire mills, hot sheet mills, temper mills.
| Chemical Composition % | ||||||||
|---|---|---|---|---|---|---|---|---|
| Symbol | C | Si | Mn | P | S | Cr | Ni | Mo |
| CCⅢ | 2.90-3.60 | 0.25-0.80 | 0.20-1.00 | ≤0.40 | ≤0.08 | 0.50-1.50 | 2.01-3.00 | 0.20-0.60 |
| CCⅣ | 2.90-3.60 | 0.25-0.80 | 0.20-1.00 | ≤0.40 | ≤0.08 | 0.50-1.70 | 3.01-4.50 | 0.20-0.60 |
| Prosperities & Application | ||||
|---|---|---|---|---|
| Symbol | Hardness | Tensile Strength | Dimension | Application |
| HSD | MPa | MM | ||
| CCⅢ | 65-80 | ≥350 | ¢300-800 | Small section mills, wire mills, hot sheet mills, temper mills. |
| CCⅣ | 70-85 | ≥350 | ||
CCIII follows the classic chilled iron design: a working layer cooled rapidly during casting so that it forms a dense, carbide-rich, very hard structure, backed by a tougher core that carries the load. This arrangement is what has kept Chilled Iron Rolls in service across rolling mills for a long time.
In CCIII, chromium and molybdenum strengthen the carbide network and the matrix, while nickel at 2.01-3.0% improves hardenability and toughness. The grade works at 65-80 HSD, a wide band that lets mills choose a harder face for abrasion-driven stands or a slightly softer one where loads vary.
The dense chilled layer is also quick to shed surface heat into the roll body, so temperature gradients stay moderate during continuous rolling.
The carbide-rich surface resists abrasion from scale and hot stock, so grooves and barrel surfaces change slowly. This stretches the time between regrinds and roll changes.
Slow wear and moderate thermal distortion keep roll geometry stable, which supports consistent thickness and section size.
A fine, hard working layer takes a high polish and holds it, transferring a clean surface to the product.
Chilled iron is a cost-effective route to high hardness. For mills that do not need the premium of more complex alloy systems, it delivers strong wear life per unit of roll cost.
Because the grade spans 65-80 HSD, a single family can cover several stands, simplifying roll inventory.
CCIII is applied across four mill types, each with a different demand:
Frequent passes through narrow grooves call for wear resistance and profile stability. CCIII keeps groove geometry close to its design for longer runs.
High rolling speeds and rapid thermal cycling make a stable, hard surface valuable. The grade supports steady size control through the campaign.
Surface quality and flatness come first. A dense, polishable roll face limits marking and helps keep sheet thickness uniform.
Temper rolling transfers the roll surface directly to the strip, so durability and surface consistency determine product quality.
In every case, hardness level, barrel dimensions, and finishing should be matched to stand position, product, and cooling practice. For finishing and near-finishing duty, quality Chilled Iron Rolls help hold the line's output steady.
A chilled roll has a distinct hard outer layer that transitions to a softer core, while an infinite chill roll has a more gradual hardness decline. Chilled rolls are simpler and economical; infinite chill suits mills that need deeper regrinding.
It lets stands use the same grade family at different hardness levels: higher for wear-dominated stands, lower where impact is more likely.
Warm the roll up before rolling, keep cooling water even, and avoid leaving hot stock sitting in the pass during stoppages. Chilled Iron Rolls respond well to steady thermal conditions.