Adamite Rollers 160I (AD160I) can withstand the friction and wear of the metal blank during high-speed rolling, extending the service life of the roll. Semi-steel rolls are composed of a steel core and a cast iron outer layer. The steel core provides high strength and can withstand large rolling pressure and impact loads, ensuring the stability and safety of the rolling process. The steel core provides good thermal deformation resistance, maintains good shape stability even at high temperatures, and ensures the dimensional accuracy of rolled products. It is suitable for various rail rolling mills and can meet the rolling needs of metal blanks of different sizes and materials, including the rolling of various types of rails. Semi-steel rolls can improve the production efficiency of rolling mills. Semi-steel rolls have characteristics in terms of wear resistance, strength, thermal deformation resistance, production efficiency, and cost-effectiveness, and are suitable as roll materials for rail rolling mills.
Hardness HSD: 40-60
Nickel composition %: ≥0.2
Suitable for racks: Chinese steel rolling
Usage: Roughing stands of section, bar, and wire mills; large, medium section, rail, steel blank, section universal mills; hot strip roughing rolls, backup rolls, and edger rolls.
| Chemical Composition % | ||||||||
|---|---|---|---|---|---|---|---|---|
| Symbol | C | Si | Mn | Cr | Ni | Mo | P | S |
| AD140 I | 1.30-1.50 | 0.30-0.60 | 0.70-1.10 | 0.80-1.20 | 0.50-1.20 | 0.20-0.60 | ≤0.035 | ≤0.030 |
| AD160 I | 1.50-1.70 | 0.30-0.60 | 0.80-1.30 | 0.80-2.00 | ≥0.20 | 0.20-0.60 | ≤0.035 | ≤0.030 |
| AD180 | 1.70-1.90 | 0.30-0.80 | 0.60-1.10 | 0.80-3.50 | 0.50-2.00 | 0.20-0.60 | ≤0.035 | ≤0.030 |
| AD200 | 1.90-2.10 | 0.30-0.80 | 0.80-1.20 | 0.60-2.00 | 0.60-2.50 | 0.20-0.80 | ≤0.035 | ≤0.030 |
| Prosperities & Application | ||
|---|---|---|
| Symbol | Hardness | Application |
| HSD | ||
| AD140 I | 35-45;40-50 | Roughing stands of section, bar, and wire mills; large, medium section, rail, steel blank, section universal mills; hot strip roughing rolls, backup rolls, and edger rolls. |
| AD160 I | 40-50;50-60 | |
| AD180 | 45-55;50-60 | |
| AD200 | 50-60;55-65 | |
Rail sections are heavy, deep, and asymmetrical. The head, web, and foot are reduced at different rates inside one groove, so the roll sees large separating forces, uneven loading across the barrel, and sharp temperature differences. Rail Rolling Mill Rolls therefore need more than hardness: they need strength, thermal stability, and grooves that keep their shape pass after pass.
AD160I answers with a semi-steel construction in which a tough, high-strength body supports a wear-resistant working layer. Hardness is set at 40-60 HSD and nickel at 0.2% or above, a combination aimed at breaking down heavy stock and shaping deep profiles rather than at polishing a final surface.
This design philosophy treats the roll as a load-carrying structure first and a wear surface second, which is the right priority in the heavy stands of a rail line.
Heavy reductions and deep passes create very high separating force. The strong body carries the load with little risk of fracture, keeping the stand safe and productive.
Large rail blooms carry a great deal of heat into the roll. The body resists thermal distortion, so roll geometry and groove alignment stay accurate as the campaign goes on.
A wear-resistant working layer slows groove growth, protecting the head, web, and foot dimensions from the first rail to the last.
Rail bites are abrupt. The tough construction absorbs impact so sudden loads do not start cracks that could end a campaign.
Longer roll life reduces changeovers on a mill where each stop is costly, and the roll's moderate cost supports a low cost per ton of rail.
The grade is used across the heavy end of the rolling spectrum:
Rail, large and medium section, and universal mills present deep grooves and complex loading, which suit the roll's strength and stable profile.
Blooming and billet production places very high loads on rolls, making toughness and heat tolerance the main requirements.
Early stands convert large stock into manageable sizes. A strong, even-wearing roll keeps later stands supplied with consistent material.
Roughing rolls take heavy reductions, backup rolls carry high load, and edger rolls resist side contact with the slab.
Hardness within 40-60 HSD, barrel size, and groove design should match the mill's stand position and product range. For heavy duty of this kind, Rail Rolling Mill Rolls should be chosen for strength first and surface finish second.
Rail and breakdown stands face heavy impact and large reductions, where excessive hardness can lead to chipping. A moderate hardness with a strong body gives safer, more reliable performance.
Even cooling and accurate alignment are especially important because rail grooves are deep and loading is uneven. Regular profile checks help keep Rail Rolling Mill Rolls within tolerance.
It is mainly for roughing and heavy-duty stands. Finishing stands generally call for higher hardness and finer surface control, and a different grade is usually more suitable.