Alloy cast steel rolls for roughing mills 70II are a common roll material made of steel containing alloying elements that improve the hardness, wear resistance, and corrosion resistance of the rolls. The alloy cast steel roll has good wear resistance and can withstand the friction and wear of the metal billet during high-speed rolling, extending the service life of the roll. The 70II rollers have high hardness and can withstand large rolling pressure and impact load, ensuring the stability and safety of the rolling process. Compared with some more expensive roll materials, alloy cast steel rolls have lower manufacturing costs, but their performance can still meet the requirements of roughing mills. They are suitable for various roughing mills and can meet the rolling needs of metal billets of different sizes and materials. need.
Hardness HSD: 35-45
Nickel composition %: /
Suitable for racks: roughing
Usage: Small, medium section roughing mills, bar and wire roughing mills
| Chemical Composition % | ||||||||
|---|---|---|---|---|---|---|---|---|
| Symbol | C | Si | Mn | Cr | Ni | Mo | P | S |
| AS65I | 0.60-0.70 | 0.20-0.60 | 0.50-0.80 | 0.80-1.20 | 0.20-0.50 | 0.20-0.45 | ≤0.035 | ≤0.030 |
| AS70II | 0.65-0.75 | 0.20-0.45 | 1.40-1.80 | - | - | 0.20-0.45 | ≤0.035 | ≤0.030 |
| AS75I | 0.70-0.80 | 0.20-0.70 | 0.70-1.10 | 0.80-1.50 | ≥0.20 | 0.20-0.60 | ≤0.035 | ≤0.030 |
| Prosperities & Application | ||
|---|---|---|
| Symbol | Hardness | Application |
| HSD | ||
| AS65 I | 35-45 | Small,medium section roughing mills,bar and wire roughing mills |
| AS70 II | 35-45 | |
| AS75 I | 35-45;40-50 | |
In roughing, the main risk is not slow wear but sudden overload. Cold ends, heavy bites, and oversized billets can all deliver shock that a brittle roll cannot survive. Alloy cast steel answers with a ductile, high-strength matrix that bends before it breaks, which is why Roughing Mill Alloy Steel Rolls remain a standard choice for the first stands of many lines.
AS70II is set at a working hardness of 35-45 HSD. This sits at the softer end of mill roll hardness, and the reason is deliberate: a moderate hardness keeps the surface tough, makes grooves easy to cut and recut, and leaves a wide safety margin against cracking. Alloying elements in the steel raise strength and wear resistance above those of plain carbon steel without sacrificing ductility.
Because steel handles shock well, the roll is able to protect the stand, the drive, and the stock itself when conditions become unpredictable.
The strong, ductile body tolerates peak loads and irregular bites, lowering the risk of sudden breakage that could damage the stand.
Moderate hardness is straightforward to machine, so groove layouts can be cut precisely and revised when the product mix changes.
Alloying gives enough wear resistance to hold the pass through heavy scale and abrasion, avoiding the rapid groove opening of unalloyed steel.
Roughing rolls spend long periods in contact with hot billets. The steel matrix tolerates this heat load and recovers well from water cooling, with limited cracking at the surface.
Early stands do not require the hardest, most expensive materials. Alloy cast steel provides the toughness they need at a manufacturing cost that keeps cost per ton low.
AS70II is used for breakdown duty in several mill types:
Billets enter large and leave much smaller. The roll's toughness handles heavy early reductions while grooves stay easy to maintain.
Larger sections create higher loads and more uneven grooves. Strength and impact resistance are the priority.
Repeated passes with strong reductions call for a roll that stays reliable through changing stock temperature.
Early stands convert billets to a manageable size for finishing stands. Consistent, steady wear keeps stock feeding evenly downstream.
Hardness within 35-45 HSD, barrel size, and groove design should be matched to billet size, stand position, and rolling schedule. Specifying Roughing Mill Alloy Steel Rolls with those factors in mind helps ensure a stable campaign.
Alloy cast steel is generally tougher and more ductile, with lower hardness. Adamite and cast iron grades add carbides for higher wear resistance but are less forgiving under heavy shock. The choice depends on how severe the impact is.
No. Finishing stands need higher hardness and surface stability. AS70II is intended for roughing, where toughness and safety come first.
Keep cooling even, inspect grooves for wear and cracks regularly, and regrind to restore profile. Good practice lets Roughing Mill Alloy Steel Rolls run to the end of a campaign without unplanned changes.