We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Home / Product / Alloy Cast Steel Rolls Grade 75I (AS75I) for Blooming and Slabbing Mills

Alloy Cast Steel Rolls Grade 75I (AS75I) for Blooming and Slabbing Mills

Return to product list

PRODUCT INTRODUCTION

Alloy Cast Steel Rolls 75I (AS75I) usually contain alloy elements, which improve their wear resistance and can withstand the friction and wear of the metal billet during high-speed rolling, extending the service life of the rolls. It can withstand large rolling pressure and impact load, ensuring the stability of the rolling process. The alloy elements of alloy cast steel rollers improve their corrosion resistance, making them suitable for rolling processes in some special environments. Alloy cast steel roll 75I has the advantages of wear resistance, high hardness, corrosion resistance, cost-effectiveness, etc. It is suitable for rolling equipment such as blooming mills and plate-cutting machines. It is a commonly used roll material with good performance.

Hardness HSD: 35-50

Nickel composition %: ≥0.2

Suitable for racks: roughing

Usage: Blooming and slabbing mills; large medium section, rail, section universal bloomers; hot strip breakers and rowers

Contact Us

PRODUCT SPECIFICATIONS

Alloy Cast Steel Rolls (AS)

Chemical Composition %
Symbol C Si Mn Cr Ni Mo P S
AS65I 0.60-0.70 0.20-0.60 0.50-0.80 0.80-1.20 0.20-0.50 0.20-0.45 ≤0.035 ≤0.030
AS70II 0.65-0.75 0.20-0.45 1.40-1.80 - - 0.20-0.45 ≤0.035 ≤0.030
AS75I 0.70-0.80 0.20-0.70 0.70-1.10 0.80-1.50 ≥0.20 0.20-0.60 ≤0.035 ≤0.030

 

Prosperities & Application
Symbol Hardness Application
HSD
AS65 I 35-45 Blooming and slabbing mills; large medium section,rail, section universal bloomers; hot strip breakers and rowers 
AS70 II 35-45
AS75 I 35-45;40-50

 

 

Breakdown at Full Scale

Blooming and slabbing mills convert ingots and continuously cast blooms into semi-finished products, and they do it with the largest cross-sections and the heaviest reductions in the whole plant. Rolls here are judged first on survival. A High Chromium Alloy Roll is often the reference point when mills think about wear resistance, but at breakdown the priority shifts: strength and shock resistance matter more than a hard, polished surface.

AS75I is an alloy cast steel built on that priority. Hardness is 35-50 HSD, and nickel is held at 0.2% or more, giving a tough, ductile matrix that is strengthened by alloying elements instead of hard carbide networks. The roll is meant to take punishment, spread it through a sound structure, and keep working.

Its moderate hardness also means grooves and barrel surfaces can be machined and restored easily, which matters when the pass design changes with product mix.

Core Advantages

Built to take heavy bites

Thick, hot stock enters the pass with enormous force. The strong cast steel body carries separating loads and impact without cracking, protecting both roll and stand.

Tolerant of uneven stock

Ingot and bloom surfaces are irregular, and temperatures vary across the section. A ductile roll absorbs these irregularities rather than breaking.

Controlled, predictable wear

Alloying provides enough wear resistance to hold passes through large tonnages of scaly stock, so groove changes follow a steady pattern that operators can plan around.

Heat resistance in continuous service

Breakdown stands are in nearly constant contact with very hot stock. The steel matrix tolerates this heat load and, with proper cooling, shows limited surface damage.

Easy restoration

With moderate hardness, regrinding and regrooving are quick, returning a worn roll to service without heavy machining effort.

Value for the heaviest duty

These stands do not benefit from extreme hardness. Alloy cast steel supplies the toughness they need at a manufacturing cost that keeps cost per ton low.

Where AS75I Is Used

AS75I covers a wide family of breakdown positions:

Blooming and slabbing mills

The core application: first-stage reduction of ingots and large blooms into slabs and blooms for downstream mills.

Large and medium section mills

Heavy section production begins with deep, demanding grooves where impact tolerance is essential.

Rail mills and universal section bloomers

Rail and universal section breakdown involve asymmetrical grooves and uneven loading. A tough roll keeps these stands productive.

Hot strip breakdown stands

In roughing stands ahead of the hot strip finishing train, the roll breaks down thick slabs under high temperature and pressure.

Hardness within 35-50 HSD, barrel size, and groove or barrel design should be matched to ingot or bloom size, stand position, and rolling schedule. For a heavy breakdown stand, an alloy steel roll like AS75I is typically chosen where a High Chromium Alloy Roll might be at greater risk of chipping.

Q&A

Q1: Is AS75I a High Chromium Alloy Roll?

No. AS75I is an alloy cast steel roll. Its alloying elements strengthen a tough steel matrix, whereas a High Chromium Alloy Roll relies on hard chromium carbides for wear resistance and is generally used in finishing positions.

Q2: Why is hardness only 35-50 HSD?

Blooming and slabbing involve heavy impact. A moderate hardness protects against chipping and cracking while still providing useful wear life.

Q3: Can AS75I be used in finishing stands?

It is intended for roughing and breakdown. Finishing stands need higher hardness and finer surface control, so a harder grade is normally a better fit.

Send Us a Message

We'll get back to you within 24 hours with a tailored solution for your rolling mill.
captcha