We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Home / Product / High Chromium iron Rolls Grade III (HCrIII) with High Hardness 75-90 HSD

High Chromium iron Rolls Grade III (HCrIII) with High Hardness 75-90 HSD

Return to product list

PRODUCT INTRODUCTION

High Chromium Iron Roll III (HCrIII) is characterized by high hardness (75-90 HSD) and is typically used in rolling scenarios where wear resistance and high-temperature resistance are required. High chromium iron roller III has high hardness and can resist wear of the metal blank under high-speed friction, extending the service life of the roller. It has good anti-deformation ability and is not easy to deform even under high pressure, ensuring the stability of the rolling process and the dimensional accuracy of the product. It is suitable for various rolling machinery, including rough rolling mills, intermediate rolling mills finishing rolling mills, etc., to meet the rolling needs of metal billets of different materials and sizes. It can meet the requirements of the rolling process and has good cost-effectiveness.

Hardness HSD: 75-90

Nickel composition %: 0.7-1.7

Suitable for racks: refined and rolled

Contact Us

PRODUCT SPECIFICATIONS

High Chromium Rolls (HCr)

Chemical Composition %
Symbol C Si Mn P S Cr Ni Mo V
HCrⅠ 2.30-3.30 0.30-1.00 0.5-1.20 ≤0.10 ≤0.05 12.00-15.00 0.70-1.70 0.70-1.50 0.00-0.60
HCrⅡ 2.30-3.30 0.30-1.00 0.5-1.20 ≤0.10 ≤0.05 15.01-18.00 0.70-1.70 0.70-1.50 0.00-0.60
HCrⅢ 2.30-3.30 0.30-1.00 0.5-1.20 ≤0.10 ≤0.05 18.01-22.00 0.70-1.70 1.51-3.00 0.00-0.60

 

Prosperities & Application
Symbol Hardness Tensile Strength Application
HSD MPa
HCrⅠ 60-75 ≥350 Hot strip mills, edge roll mills, temper roll mills, and medium plate mills; cold strip mills; section universal mill ring.
HCrⅡ 65-80 ≥350
HCrⅢ 75-90 ≥350

 

 

Why Temper Work Rolls Demand This Grade

A temper mill gives strip its final surface character, and the work roll is the tool that imprints it. Any wear or roughening on the roll shows up directly on the product, so hardness and surface stability matter more here than almost anywhere else in the line. High Chromium Iron Rolls for Temper Work Rolls are therefore specified for very high hardness, and HCrIII, at 75-90 HSD, is aimed squarely at that need.

The hardness comes from a high volume of chromium carbides in a supporting matrix, with nickel at 0.7-1.7% aiding hardenability. This structure holds the roll's surface texture or polish under repeated contact with strip while resisting the gradual flattening that softer rolls suffer.

The trade-off for such hardness is lower tolerance for shock, which is why the grade belongs in positions with steady loads and well-controlled strip entry.

Performance Advantages

Texture and finish retention

A hard carbide structure resists wearing down the roll surface, so the finish applied to the roll keeps transferring to strip across a long campaign.

Long campaigns

Very high hardness slows wear to a crawl, which reduces roll changes and keeps the temper mill running between scheduled stops.

Stable geometry under load

Resistance to deformation under rolling pressure keeps crown and gauge consistent.

Heat and speed tolerance

Temper and finishing lines run fast. The grade holds hardness at working temperature, so the roll does not soften or develop early surface damage.

Reasonable total cost

Compared with premium alloy systems, high chromium iron offers excellent wear life per unit cost. Fewer changes and less regrinding lower cost per ton.

Selection Guide by Stand

The right grade depends on how severe the duty is. As a guide:

Best fit: temper and skin-pass work rolls

Surface imprint and wear resistance are everything; HCrIII is positioned here first.

Good fit: finishing and intermediate stands

Where loads are steady and the product needs a fine surface, the grade can serve well. Hardness within 75-90 HSD can be chosen according to speed and reduction.

Use with caution: heavy-impact positions

Roughing stands and positions with cold ends or severe overloads are better served by a tougher, lower-hardness roll. A very hard roll in these conditions risks chipping.

Final specification should reflect mill type, stand position, strip width, and surface requirements. For temper duty in particular, High Chromium Iron Rolls for Temper Work Rolls should be matched to the finish the product needs.

Q&A

Q1: Why is the hardness range as high as 75-90 HSD?

Temper rolling applies light reductions but needs the roll surface to stay unchanged for a long time. High hardness keeps wear low and finish consistent.

Q2: Can HCrIII be used in roughing mills?

It is possible in some cases, but roughing duty usually involves heavy impact, where a high-hardness roll is at greater risk. A tougher grade is normally safer, and the actual stand conditions should decide.

Q3: What practices extend service life?

Preheat before rolling, keep cooling even, ensure clean strip entry, handle and store rolls carefully, and regrind on schedule. Very hard rolls are sensitive to knocks, and High Chromium Iron Rolls for Temper Work Rolls deliver their best results when these basics are followed.

Send Us a Message

We'll get back to you within 24 hours with a tailored solution for your rolling mill.
captcha