Infinitely Chilled Cast Iron Roll II (ICII) is a cast iron roll designed specifically for small section mills. The rolls are made of high-nickel-chromium alloy, which has extremely high hardness and wear resistance and can withstand high stress and wear during the rolling process. It has good thermal crack resistance to avoid cracks at high temperatures. It has good thermal conductivity and can dissipate heat evenly to prevent local overheating of the roller body. The long service life can reduce the frequency of roll replacement and reduce maintenance costs. The ICII rollers are precision machined and have a high surface finish, ensuring that the rolled metal products have high-quality surface finish and dimensional accuracy. Infinitely Chilled Cast Iron Rollers II (ICII) has a lower manufacturing cost than some more expensive roll materials, but the performance is still able to meet the requirements of small section steel mills, making it cost-effective.
Hardness HSD: 55-72
Nickel composition %: 1.01-2.0
Suitable for racks: roughing
Usage: Small section mills, narrow strip mills.
| Chemical Composition % | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbol | C | Si | Mn | P | S | Cr | Ni | Mo | V | W | Nb |
| ICⅡ | 2.90-3.60 | 0.60-1.2 | 0.40-1.20 | ≤0.25 | ≤0.08 | 0.70-1.20 | 1.01-2.00 | 0.20-0.60 | |||
| ICⅢ | 2.90-3.60 | 0.60-1.2 | 0.40-1.20 | ≤0.25 | ≤0.08 | 0.70-1.20 | 2.01-3.00 | 0.20-1.00 | |||
| ICⅣ | 2.90-3.60 | 0.60-1.5 | 0.40-1.20 | ≤0.10 | ≤0.05 | 1.00-2.00 | 3.01-4.80 | 0.20-1.00 | |||
| ICⅤ | 2.90-3.60 | 0.60-1.5 | 0.40-1.20 | ≤0.10 | ≤0.05 | 1.00-2.00 | 3.01-4.80 | 0.20-2.00 | 0.20-2.00 | 0.00-2.00 | 0.00-2.00 |
| Prosperities & Application | |||
|---|---|---|---|
| Symbol | Hardness | Tensile Strength | Application |
| HSD | MPa | ||
| ICⅡ | 55-72 | ≥160 | Small section mills, narrow strip mills. |
| ICⅢ | 65-78 | ≥350 | |
| ICⅣ | 70-83 | ≥350 | |
| ICⅤ | 77-85 | ≥350 | |
Small section rolling places unusual demands on a roll. Grooves are narrow and numerous, bars travel quickly, and the thin stock leaves little room for error once a pass starts to wear. ICII is an infinite chilled iron grade developed with these conditions in mind, and it serves as a practical option among Small Section Mill Rolls for roughing positions.
The nickel-chromium alloying is moderate, with nickel at 1.01-2.0%. Nickel and chromium work together to harden the working layer and to keep that hardness from dropping sharply with depth, which is the idea behind infinite chill. Working hardness spans 55-72 HSD, so the roll can be specified from tougher to harder depending on how much shock the stand sees.
Compared with a conventional chilled shell, a gradual hardness profile leaves usable hard metal below the surface. Grooves can be recut and the roll can return to work without exposing a soft core.
In small passes, even slight groove growth changes the finished bar. A hard, carbide-bearing surface slows this growth, so profiles hold their form for more tons per roll.
Rolls in small section lines are heated by stock and cooled by water many times per minute. Good resistance to thermal cracking keeps surfaces from developing the fine crack networks that mark the product and shorten roll life.
Good thermal conductivity spreads heat across the barrel instead of letting hot spots build. Even temperature means even expansion, which helps keep roll gaps and groove geometry stable.
A hard roll face that wears evenly transfers fewer marks to the stock. Combined with accurate machining of grooves and barrel, this supports consistent dimensions and a neat surface.
Longer campaigns reduce changeovers, regrinding, and handling. Over time this lowers maintenance workload and keeps the line running longer between stops.
ICII costs less to produce than many high-end roll materials, yet it delivers the hardness and wear life that small section work requires, keeping cost per ton under control.
ICII is positioned for roughing duty in light-section production:
Rolling angles, flats, rounds, and other light profiles involves many passes in quick succession. The roll's wear resistance and surface stability suit this rhythm, and Small Section Mill Rolls of this type help keep size consistency across long runs.
Early stands in narrow strip lines see hot, thick stock and fast contact. Hardness retention and resistance to heat checking help the roll hold its surface and keep strip edges and thickness consistent.
Roughing positions need hardness with enough strength to meet entry shock. The 55-72 HSD range lets mills choose a lower setting for heavy impact or a higher setting for abrasive conditions.
Final selection should take into account stand position, rolling speed, groove depth, and cooling practice, so that the hardness level and roll dimensions fit the duty.
Hardness decreases gradually from the working surface toward the core instead of ending abruptly at a thin chilled layer, so grooves can be recut without reaching a soft zone.
At this level nickel supports hardenability and a stable matrix while keeping cost moderate. Higher-nickel grades exist for stands with more severe finishing duty, but roughing and small section work rarely needs them.
It is positioned for roughing. Finishing stands, which require tighter surface control and higher hardness, are normally better served by a different grade. When choosing Small Section Mill Rolls for different stands, match the grade to each position and its actual rolling conditions.