Infinite Chilled Hard Cast Iron Roll III has wear resistance and can withstand the friction and wear of the metal blank during high-speed rolling, extending the service life of the roll. ICIII rolls are suitable for narrow-strip rolling mills and can meet the rolling needs of narrow-strip metal billets, including narrow-strip steel, aluminum, etc. of different sizes and materials. ICIII rolls can improve the production efficiency of the rolling mill, and reduce downtime during the production process and the frequency of roll replacement, thereby reducing production costs. The high surface finish ensures that the rolled metal products have high-quality surface finish and dimensional accuracy. Infinitely chilled cast iron rollers III (ICIII) have the advantages of good wear resistance, chilling performance, and high production efficiency in narrow-strip rolling mills. It is a roll material with strong applicability and high-cost performance and is widely used in the metal processing industry.
Hardness HSD: 65-78
Nickel composition %: 2.01-3.0
Suitable for racks: refined and rolled
| Chemical Composition % | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Symbol | C | Si | Mn | P | S | Cr | Ni | Mo | V | W | Nb |
| ICⅡ | 2.90-3.60 | 0.60-1.2 | 0.40-1.20 | ≤0.25 | ≤0.08 | 0.70-1.20 | 1.01-2.00 | 0.20-0.60 | |||
| ICⅢ | 2.90-3.60 | 0.60-1.2 | 0.40-1.20 | ≤0.25 | ≤0.08 | 0.70-1.20 | 2.01-3.00 | 0.20-1.00 | |||
| ICⅣ | 2.90-3.60 | 0.60-1.5 | 0.40-1.20 | ≤0.10 | ≤0.05 | 1.00-2.00 | 3.01-4.80 | 0.20-1.00 | |||
| ICⅤ | 2.90-3.60 | 0.60-1.5 | 0.40-1.20 | ≤0.10 | ≤0.05 | 1.00-2.00 | 3.01-4.80 | 0.20-2.00 | 0.20-2.00 | 0.00-2.00 | 0.00-2.00 |
| Prosperities & Application | |||
|---|---|---|---|
| Symbol | Hardness | Tensile Strength | Application |
| HSD | MPa | ||
| ICⅡ | 55-72 | ≥160 | Small section mills, narrow strip mills. |
| ICⅢ | 65-78 | ≥350 | |
| ICⅣ | 70-83 | ≥350 | |
| ICⅤ | 77-85 | ≥350 | |
Narrow strip lines run light gauges at high speed, and the strip edges make concentrated contact with the barrel. A roll in this service has to hold a smooth face and an accurate profile, because any marking or wear step is copied straight onto thin material. ICIII is an infinite chilled iron grade built for finishing duty, and it is a dependable choice among Strip Mill Rolls for narrow-strip work.
The grade combines 65-78 HSD hardness with nickel at 2.01-3.0%. Nickel refines the structure and supports hardenability, so the working layer stays hard below the surface and hardness falls off gradually instead of abruptly. The result is a roll that keeps a fine surface early in the campaign and still has usable hard metal after regrinding.
In narrow strip rolling, wear often concentrates where the strip contacts the barrel. High hardness slows the development of wear steps, so strip edges and thickness stay consistent.
A fine, dense roll surface transfers a clean texture to thin strip. Because it wears evenly, the finish remains uniform from the beginning to the end of a campaign.
Light strip heats the roll briefly and cools quickly, but the cycle repeats constantly at speed. Hardness retention and resistance to surface checking help the roll avoid the fatigue damage that shortens campaigns.
Longer campaigns mean fewer stand changes and less regrinding, which adds to effective rolling time and smooths production planning.
The grade is more economical to produce than many premium roll materials, yet its hardness and wear behavior suit finishing service, so roll cost per ton rolled stays modest.
Final passes determine strip thickness and surface. ICIII is positioned here, where wear resistance and surface stability matter more than resistance to heavy impact.
Mills that roll several widths and gauges can use the roll across product changes, with barrel dimensions and surface preparation matched to each program. In each case, well-matched Strip Mill Rolls help the mill hold size and surface quality through the changeover.
The roll can serve steel strip and other metal strip, provided rolling temperature and loads are suitable. Each material's temperature, reduction, and lubrication should be considered when choosing the grade.
Selection should consider stand position, strip width, rolling speed, and cooling practice. Roll dimensions and hardness level can be matched accordingly.
Its hardness of 65-78 HSD favors wear resistance and surface quality over impact tolerance. Roughing stands face heavier shocks and are normally better served by a tougher, lower-hardness grade.
It refines the matrix and improves hardenability, supporting a smooth hardness gradient through the working layer. This is a mid-level range, balancing performance with manufacturing cost.
Even cooling, correct alignment, smooth strip threading, and timely regrinding all help. Good practice lets Strip Mill Rolls hold their finish and profile for the full campaign.